When last you tuned in, our intrepid band of Adventurers found themselves in Willoboughy Bay.
We hoisted anchor and headed out intent on making it to the Great Bridge.
We were all nervous about the bridges and lock. Both the boat crews, Adventure and Acadia are pretty new to this stuff and we were buddy boating together for moral support I suppose. And I wanted some assurance of the depth so I let them go first to call out depths if it got to shallow. We saw no stuck boats along the way, so obviously it wasn’t too bad. I’m SURE there were boats with deeper drafts than ours passing through before us.
We motored the entire distance from Willoboughy Bay to the various bridges. The first one was easy. The next one was fixed. Norfolk and Western was open. Gillmerton was one we had to wait for, no problems, except we had to wait for 30 minutes because we arrived too soon I guess.
Then we got to the lock. We had to wait at the lock. A long time. Anyway, the lock turned out to be NO problems at all. We got to the Great Bridge, everyone waited, they opened it, and we pulled over at the Atlantic Yacht Basin for the night. Acadia got fuel, we docked. The next morning I pulled the boat around and fueled up and then we left after both boats were ready to pull out.
Again, Acadia led. When we arrived at the Centerville Turnpike Swing Bridge I remained behind Acadia a few dozen yards. Our boat takes awhile to get up to speed, and it takes awhile to stop. If the wind isn’t on the nose (and even if it is) inertia on her is tremendous. Takes sometimes 5 or 6 boat lengths to come to a stop. There was no wind. And it takes a few minutes even at full throttle from a dead stop to get up any speed.
We all started through (after being admonished to “GET CLOSER” by the bridge master) – a large power boat, Acadia, then us. Then as I’m coming up on the bridge the guy on the radio starts yelling at me for being “slow” and tells me, while yelling into his radio, “I should CLOSE this bridge on YOU NOW”.
He didn’t… and to my own credit I didn’t tell him what I thought of him. I “thanked him” politely and went on and let it roll off my back.
I know these guys are government workers. And I know that some can be assholes. This guy was an asshole, and a jerk to boot. I hope someone reads this and says something to him, but probably not. (And I’m sure someone else will say I was in the wrong, even though they weren’t there, lol). To prove I was not wrong, here’s the regulation: https://www.law.cornell.edu/uscode/text/33/499
I understand there are cars, I understand it “holds people up”. But, I ALSO know the history of bridges, and boats DO have right of way. We were within 100 yards of the bridge (It was a swing bridge and swings to the north). We were behind another sailboat, neither known for their maneuverability in close quarters with full keels – us, and them with a full keel and a board that was up). We moved as SOON as the bridge opened, and it took time to get up to speed, and NOT make a wake because we’d been admonished NOT to do that either….. Finally, the bridge was opened for less than 4 minutes from the time the first boat shot through, to the time I plodded through. And it was well within the normal opening time (about 10:30, and in fact, 3-4 minutes late).
Here’s the rub though. Federal law (33 U.S. Code – Regulations for drawbridges) mandates boats have right of way at bridge crossings. Yeah, several states have adopted rules on busy bridges and won’t open at all during certain times, and only open maybe on the hour or half hour during daylight hours. Or they open on signals from the boats passing them. So, why is a bridge tender screaming at a slow moving sailboat whose top speed is rarely more than 6 knots under engine power (with the wind behind it mind you)? Good question.
But, oh well. That was the beginning of my day yesterday. The first day out of Willoboughy Bay went fine. Even passing giant ships, cargo vessels, aircraft carriers, and two ships coming out about the same time as we were passing, we negotiated things fine.
When we got to the first sound, it was hairy. Wind was blowing pretty hard and apparently causing a current, which I didn’t realize would happen. I expected long fetch to generate waves… but not necessarily current. I manage to get pushed out of the channel 2 or 3 times towards the end of the run, to the point I was seeing 7 foot depths and at 6 feet, I was going to hit the ground, probably hard. The wind was either on the nose sometimes or just off the starboard bow and helping kind of push us sideways as well.
It was nerve racking knowing that hitting the ground there was going to stop us cold and we’d likely have to get towed out of it.
When I arrived last night I was short tempered with everyone and upset at myself because it wasn’t going smoothly, I’d been yelled at for no real reason by some “authority” who really shouldn’t be doing that anyway. I was hungry, tired and literally exhausted. I made the decision to stop here at Midway in Coinjock (JoAnne had called and gotten a reservation for us) and the Acadia – who thought they had a reservation at Coinjock across the way, didn’t have one and moved on to an anchorage.
So, Jon and Marcia went on ahead and we said good bye over telephone (because we had 4G and 5 bars, how cool is that for the first time to be able to actually communicate using a phone in damned near a year?) and hope we cross paths again.
They are pulling out someplace near Raleigh-Durham to visit grand kids I think. We’re headed as south as we can get in the next couple of weeks.
Last night I decided we’d remain on the docks here for a couple of days. There’s a good blow coming tomorrow, 16-20 knots I saw on one report, maybe rain later tonight and perhaps tomorrow. Saturday MIGHT be a good day. I’ll look over my GRIB files in the morning and decide if we will leave Saturday or Sunday morning. Since we’re motoring, NO wind would be the best thing I can hope for.
But, I took the time to pull the aft compartment apart, open up the batteries, check everything, and run an equalization on them, which seems to have helped them a bit. I’m hoping to get the batteries to go back to float again on the meter, but not sure if they are damaged or not. My hydrometer is hokey and I’ll have to get a decent one (I have two, one is really old and it doesn’t seem to work either.)
At this point I think I have the batteries, and the charging system “synced” finally. I still don’t think the main system batteries are holding a charge right though. I’ll check things once more in the morning.
The other issue that boat Acadia and Adventure had seems a little odd for fiberglass boats. Rust spots. Millions of them. They appeared out of nowhere and we discovered them a day or so after we were in Fishing Bay. At this point we suspect the lift (we were both lifted, we were cleaned and they were worked on for battery replacement, and a serious leak at the rudder post). We considered the cleaning might have done it, but they weren’t cleaned I don’t believe. Just hoisted up and worked on. So I think that the steel cables (which were rusty) or the engine (diesel, with a large flapping exhaust pipe) might be the culprit.
It is most likely the engine was blowing exhaust out, along with water, and rusty from the old lift engine and splattered both our boats.
I knew that if I could get some oxalyic acid I could likely get the stuff off. JoAnne found a solution, she handed me a can of stuff that looks like “Ajax” in a can, but is called “Bartender’s Friend” which is used in bars and restaurants to clean stainless steel, apparently. She had purchased some so I could use it on the old stainless grill we have. Which I did and it worked, and I’d forgotten all about it. It also worked on the stains too. I didn’t get them all off but I did get the worst of it gone.
The boat top is in dire need of paint. One day, I’ll paint it. Mean time I have to keep washing her down.
Now to the not so good part. Pulling up to the dock I lost all steerage. I knew that I needed to come in slow, as there was a boat in front of me, and one behind. I slowed too much. I managed to not get the boat turned in time and though we were moving at fractions of a knot, I caught the bow pulpit against a dock post. The post remained undamaged, but the pulpit steel bent a bit. I tried today to engineer a fix, and succeeded in pulling it back a small amount. But the starboard side is push back an inch or two. I’ll fix it.
So, batteries seem to be doing ok. Got the little rusty spots off the plastic (haha). Got through the first stretch of the ICW. Got some sleep last night, and planning to sleep well tonight.
Oh… best part of today. We are the sailing Ketch Adventure. I was told by the owner here that it was funny, another boat named adventure was coming in. Sure enough, today, right in front of us, the sailing schooner Adventure shows up. A large, steel ketch, complete with ratlines up the rigging, shorter masts than we have, but a wider behind. The cockpit is huge and she’s over all a beautiful boat. But, of all the lookie-loos today, most of them stopped here to look at us, and not at the other boat.
I was proud 🙂
(then again, they could have been staring at the horrible paint, my bent steel, the dirt on my hands and feet and knees from cleaning, and sniffing the smell of sulfur as the batteries cooked below… who knows?)