Sails:

Three jobs I want done.  Sails repaired (the UV damage I can’t really fix, I’ll need a sail loft to do, as I have no sewing machine and I’m not sure how to go about replacing pieces of the sails yet).  The toilets; time for a composting head.  And power.  I like power.  JoAnne and I have our computers, my ham radio gear and we like to have lighting at night most evenings for reading.

Today I spoke to a local sail loft, and someone will come out to the boat this week to assist me in unsticking and checking the internal rigging for the mizzen.  It’s been giving me fits since the first day.  It’s pretty stuck again.  Maybe it’s me.  Maybe it’s the internal rigging.  I did have it working once pretty well, but it’s acting up again.

The main and mizzen are both suffering pretty badly on the clew where it hangs out of the mast.  On the main mast furling (for those who don’t know) the clew (the bottom corner part of the head sail farthest from the mast) sticks out about 10-12 inches when the sail is rolled all the way in.  That part of this particular sail has no UV cover or protection and it’s sat for many years in the sun.

Amazingly, the sails inside are clean and pretty.  Though, could use a good washing.

The mizzen sail (again, for the non-sailors that follow us, the rear most mast on the boat) is the same way (and the mechanism is the same, only smaller).

When I talked to Jerry from the sail loft he told me I could either remove the sails and bring them down and they’d price it out for me, or someone could come to the ship and assist if necessary.  When I explained the problems with the mizzen, he said he’d probably come out personally.

At this point, I’m going to hand over the working jib, main and mizzen and not worry about the genoa.  I let it out and examined it pretty carefully again today.  I’ve had it up and down a few times and looked it over.  The only real wear is at the clew where you attach the sheets.  However, it’s nothing at all to worry about right now.

Before we head for the Bahamas (under sail we hope) we will have decent sails.

Toilets:

On the toilets.  I really like the electric head.  But, I HATE that it uses electricity.  I hate that there is a holding tank.  I hate the plumbing.  I hate when we have to use it and put anything in the tank.  We have literally no smells aboard the boat except when the tank gets something added to it.  The tanks are old (original) and are stainless steel.  Worst possible thing they could be for holding waste.  Even stainless steel “stains” around urine.  I don’t even want to think about what it will be like to remove that tank….

On Facebook in the Sailing and Cruising group, and on several of the online sailing groups, composting toilets have been discussed to death.  There are two, absolute views on them.

A) Hateful, evil, nasty

B) Loving relationships

Those who use them on their boats love them.  Those who don’t like them have either had little experience with them or none at all.  Of course, like everyone else, I’m somewhat generalizing, but this is truly what I have read from the masses online.  Of the several people we’ve met using them, and having them on a cruising boat we found that without exception they state they are 1) clean, 2) do NOT smell, 3) do not have to worry about if your Y-valve is locked or not, 4) easy to clean and care for.

Of those whom I’ve personally had discussions who didn’t like them, they have said “They stink”, “they are nasty”, “They can flip upside down” (so can your boat with a holding tank), “I wouldn’t own one”, “I’ve never used one” and various other remarks that lead one to believe they are horrible.  But, in almost ALL cases, there is no experience with them at all, or minimal.

In all, we’ve probably spent a couple of hundred hours of research, reading and talking to the various companies, and friends about this subject.  One one never imagine having to talk about poop so much.

Finally though, we decided that we’re going to replace ONE of the toilets on the boat with a composting toilet.  We’re going to go with the C-head – because it’s half the cost of the others.  But it also uses easy to find parts if something goes bad or breaks.  The truth is I could go up the hard ware store and buy a bucket, some play wood, some glass and build my own given the pictures and knowledge I have now.  I just don’t have a full service wood shop on the boat (though I have a lot of tools) I don’t relish the idea of building something and taking a couple weeks to do it and then maybe mismeasuring one thing.

So we will purchase one and install it.  If all goes well, we’ll replace the second before the time to depart in the fall.  Sometime next year I’ll have the boat hauled when we do our painting and cut out the ancient tanks, plumbing and remove those through hulls and have the hull repaired, fared and painted.  That will remove several through hulls and the associated plumbing, and a large space in the bilge will be emptied out for us.  Next year.

Electricity:

What a mess.  My house bank is really for the windlass and the bow thrusters.  Everything else in the house actually appears to run on the starter battery.  Oh. My. Wow.

I will need to get under the bed, the aft head, the bilge, and the port bulkheads to locate wires and figure out what goes where and draw schematics.  What a mess.  I want to add solar and a wind generator, but I’m not even sure where I’ll put solar panels on this boat.  No real place to do it.  The taffrail on the aft might hold them, except for the mizzen mast rigging.  The davits might hold them, IF I have something built up above them.

A wind generator can be mounted on the mizzen.  Except for the big issue of making connections to everything, needed a specialized charge controller to handle both solar and wind generator.

As much as I hate to do it, I’m going to have to find a consultant to assist me to dig through the wiring and figure this mess out.  I’m not sure this is going to be an easy thing to do anyway.  I DO know I can rewiring some things, I just don’t have a good handle on it yet.  Going to take me a few days of measuring voltages and tracing wires.

The toilet, in comparison to the electrical issues is going to be a cake wake.