Category Archives: C-Head

Christmas 2016

by

Hi everyone.  Thought I’d try to get in one more blog post before the end of the year.

It’s been a long, challenging year for us. In fact, two challenging years.  (I already posted a message for Christmas on Facebook, and will probably restate a few things here so if you think you’ve read it before, you might have).

In 2009 we decided to learn to sail, and eventually to become cruisers.  JoAnne and I have read literally a couple of hundred books over the course of time since that day we made the decision.  While all of them were helpful, some were stories, fiction, true adventure, and books about storms.  All of them helped prepare us for everything we have encountered and a few things we’ve yet to (and don’t want to) encounter.

Last Christmas we were sitting in Colorado with our kids and Grandkids after JoAnne’s back injury.  We thought more than once we wouldn’t get back to the boat and would have to sell her.  But, things didn’t turn out like that.

We’ve traveled back and forth across the country about five times since July 2015, for medical appointments, visiting and due to injuries.

This season we moved the boat to Cole’s Point Marina, where we worked on the boat.  We added solar panels, repaired the refrigeration, I had already added a new stove, refurbished the sails, repaired many little things, added a composting toilet, removed a broken electric toilet and replaced it with a Jabsco pump toilet.  I’ve added strip LED lighting to the main cabin area (and will add some to the forward cabin in time, along with some new wiring I’ll pull in when I have an opportunity).  We’ve eliminated a few things (not enough).  We’ve picked up an inline water filter to remove the bad tastes and to take water aboard.  I’ve made a water catchment device to collect rainwater, picked up a propane heater for the cabin, as well as an electric heater.  We’ve worked out how to make the wood stove work properly.  I’ve rewired the nav station, radio gear (neatened it all up and added a special power strip for DC radio gear.  Eventually all the radio gear will be tied there).  Oh, and I varnished about 80% of the woodwork aboard Adventure.  I have been testing some varnish.

I certainly am missing a few jobs we did.  I’m sure I’ve forgotten something.

A few weeks ago we ran into some more alternator problems (which I documented) and had that repaired and discovered a LOT of other issues on the engine which we also had taken care of.  During the work, I had the mechanic teach me a few things since I was paying and arm and a leg (I know why pirates have hooks and peg legs now…).

We paid up our bill here through 6th January and decided to stick out Christmas here.  One of the folks sailing down from Canada we’re friends with (Rosemary and Joe, aboard “Winds of Change” were coming down and so JoAnne invited them to dinner.  Turned out other boats were traveling with them.  We thought two, then it was actually four boats total.

So the dinner turned into a pot luck.  Then more cruisers and liveaboards near by joined into the dinner.  All told, on Christmas Eve we had about 15-18 people (I never counted them up), and one boat’s couple left to visit relatives so they missed the dinner.  Others joined in and everyone brought food, drink and stories.

Over all, a grand success.  JoAnne was worried about putting something like that together.  I’m not sure why.  She has always fed an army (usually doing ALL the cooking herself, raising five children, usually having boarders in the house, and random neighbor children who ALWAYS were there for dinner almost every night).  So, whatever trepidation she had vanished as she turned on her “Chef Skills” and made a giant pot of stew which likely would have fed everyone in the marina that day with a side of rice.  Fortunately, there was plenty more food than we could ALL eat.  Everyone brought something, from sloppy joes to stew, to small “sub sandwiches” to enchiladas and bottles of wine and rum.  I was shocked at the amount and quantities.  I tried a little bit of everything and had two full bowls of stew.

“Winds of Change” happens to have been the name of our first boat, our Macgregor Venture.  So when we saw the name on the group, we had friended them on Facebook immediately.  After all, we share a connection.  The boat name, and now the Leaky Teaky boats, ours the Transworld 41 and them the Formosa 41.   It was wonderful to get to meet them in person finally!

I have to say that I still like our center cockpit a bit better, though I think sailing from the aft of a sailboat this big might have a few advantages over the CC.  I can’t tell you though, what those might be.

All in all, this year traveling from the Potomac in late October to here has been relatively uneventful compared to last year.  Although, we have gone aground a few times, we’ve bumped some pilings, and I have some small damage on the port side where I caught a pole in the water, the engine conking out…. we haven’t really had major issues.

Yes, it was stressful coming down the ICW.  I was at ease going outside and motorsailing at night, but I always worry about all the things that can “go wrong” out there.  I worry for JoAnne’s safety much more than mine (because, quite honestly, I’d done some really dangerous things in my life and while the majority of them I wouldn’t want to repeat, I understood what I was doing, and knew I could die).  Sailing in the ocean is one of those things.

You understand it.  You know you can die.  But you also, always, concentrate on the moment in time, staying alive, staying safe, staying on course, going there you’re going and knowing you have options to handle almost anything.  Even, right down to closing down the hatches and doors after taking down sails and putting out a sea anchor, then hoping the boat will ride out whatever you hit.  In almost all cases, a boat will do fine.  It’s generally the crew who can’t handle it.

We have one issue on our boat.  JoAnne isn’t really able to run the boat alone.  I’m worried she will injure her back again and she has been prone to falling in the past so I won’t put her in danger.  That means I tend to do everything on deck, though I have been letting her toss lines out, and put out fenders to get used to doing it again.  So running a “shift” isn’t too easy, unless I set things up and let her stand watch, let the autopilot take care of things until the wind changes or we have to tack.  Then she can wake me if I’m sleeping and I can do the work.

This basically means for us, sailing straight to Florida isn’t going to be easy.  From here at five knots it would take us about 65 hours (give or take where we pull in).  And just two of us doing it.  Then we have to count on the engine from time to time to charge batteries if the sun isn’t out (solar, remember?)

Therefore we’ve come up with muliple plans to get south now.  From here we are planning to sail straight down to Jacksonville area.  And as we go we’ll make changes to our thinking based on the conditions we encounter and how tired we get.  We’re going to try it in pieces as well.  So, we’ve picked a half dozen distant spots to pull into if need be to anchor and rest.  We’ve also planned part of the route inside as well.

We have many options from here, but the main goal, to “get south and to warm” is the priority.  That and using the engine the least amount necessary, anchoring when we need to, and staying warm.

So as the year closes on us, we are shooting to be in Florida not later than about 3 weeks from now, whether we can move more quickly, or slowly will depend on a lot of factors including the weather and my ability to take us long distances on the boat.

To this day, I am not ready to lie down and sleep with the boat moving.  So, I’m probably going to have to learn that skill next 🙂

I want to wish everyone a “belated Merry Christmas” as I’m posting this the day after.

And I want to give everyone something to consider for the New Year.

Many people make “resolutions” to accomplish or do something important in the New Year.

I made a resolution never to make resolutions a long time ago, so I don’t do that.  But I do make plans, I do set goals, even if they are in my head and not written down.

For the cruisers, the dreamers and the wanna-be cruisers who’ve not quite gotten here yet, I’m going to give you a secret.

The secret to success is “perseverance”.

That is the secret ingredient to “success”.

If you have a dream to move aboard a boat and go cruising, you will have to work at it.  You will have to plan.  You will have to make decisions, some easy, some difficult.  You will have to write your notes down.  You have to learn to sail if you don’t know how.  You have to work your ass off.  You have to practice.  You have to learn new skills.  You have to travel a bit, you have to stay home a lot, you have to spend some money, and you have to save money.

With out laying out a map for you, I’ll tell you this:

  1. Make a plan (Do you want to cruise full time, or part time? Do you want to just travel the Chesapeake?)
  2. Get your skill set together as you go, every day work on it (Can you sail? Learn! Wood work? Plumbing?)
  3. Study hard, study sailing
  4. Save your money.  Spend it wisely on learning, important books you need (Use the LIBRARY, it’s FREE!)
  5. Pay your bills.  ALL Of them.  Eliminate them.  If you use a credit card, PAY it off EVERY MONTH.
  6. Have your goals written down and check them off as you go.  Once you get one, check it off. (Then go back and pat yourself on the back!)
  7. PERSEVERE!  Do NOT give up.  Do it.

Adversity has a way of weighing people down, depressing them, making them believe they can never get up again and sometimes adversity will literally break your back, bones, make you sick and leave you in pain.

Pain is the one thing that tells us we’re still alive and we should be doing something else.  Find a different route.

If you want to sail, do it.  Start small if you have too (I didn’t, I am glad I didn’t.  I started on a 30′ boat and went SMALLER to a 25′ boat for practice, and the 25;’ boat was like a part of my arm when I stepped aboard).  Getting on to a bigger boat like this ketch at first will be daunting and probably stop one from sailing without a very good instructor.

I’ve been teaching myself how to sail this boat.  She handles differently that a fin keel, from a sloop and from a dinghy.  She handles much differently that my little Venture did.  She has a mind of her own and I’ve had to learn to tame her, and make he go where I want her to go.  It’s difficult to do with no books on the subject and only the meager knowledge I gained from an instructor and sailing my own sloop.

The point, though, is don’t give up.  Continue.  Persevere.

That, folks, is the secret to success.  You just take that and apply it to your set of circumstances.  YOU are the one to make it happen.

All our best for a Happy New Year – and I mean the whole of 2017.

We’ll see you in the Warm.

Rick and JoAnne

(PS I will add images into this a bit later, so check back when you have time)

 

 

Update July 1: C-Head, Solar, Sails, HF Radio

by

C-Head:  Over the course of the past couple of weeks I have been busy digging in the lockers, getting parts together, ordering things and repairing a few things.

We ordered and receieved the standard “C-Head” toilet a couple of weeks ago.

Unpacking it was easy.  The parts inside are standard parts.  The most expensive piece I suppose was the C-Head container which is a box like plastic container.  It holds a standard sized 5 gallon bucket which has been modified for use inside, with a frame that holds a paddle that you crank around to mix up the composting material.

The number 1 bucket (pee bucket) is a simple 1 gallon water/milk jug.

The device is well built, but personally I still feel it much more expensive than it needs to be.  Everything can be back engineered however to make your own if you wanted to.  In our case, after looking over the forward head, that appears to be our next option.  I’ll just reverse engineer this thing to fit a new, home built device in the forward head.  Reason being is this standard one will not fit.

Installation was easy.  Taking the old electric head out was a bit more difficult, but it took me a couple of hours.  I still have not actually removed the hoses.  I plugged them all, and left everything in place “just in case”.

The new head doesn’t quite fit right, but after playing with the various angles of the head we were able to mount the toilet in there.  It’s been in use for over a week without any issues at all.  I make it a point to empty the urine jug daily though.

So far, so good.  It doesn’t smell at all, especially not like the still-existing holding tank.

Wiping it down is easy.  Emptying the tank is easy.  I have yet to attempt the emptying of the bucket (the “Number TWO” container, haha).  That will be soon so I can make sure it’s done once and I’ve gotten the hang of it.

Solar:  Solar panels and some parts arrived a week ago as well.  I have installed them on the Bimimi frame.  Unfortunately, I don’t have the money to buy all the cool, fancy stainless steel fixtures I actually needed, which would have been clamp on stand offs.  Instead, I manufactured my own.  Cost me about $20 dollars for stainless steel bolts, nuts, washers and some aluminum stock (yeah, I know steel and aluminum don’t mix in sea water, but these are physically under the bimini anyway).

I will add pictures when I have time to this blog entry.  I have to take them, upload them to the host, then post the images in the text here.  It will not be today.

The solar panels are working very well, but, they aren’t hooked up, so there’s no place for all that beautiful sunlight to be stored as electricity at the moment.  However, the Charge Controller is mounted already in a closet in the aft quarters.  I have a plan together to run the wires through an existing deck entry which contains an apparently non-working GPS antenna.  I’ll be tracing wires shortly to make sure it’s not being used somehow.  There’s a second one mounted on the aft taffrail area, and it blinks a green light when operational, orange when searching, so I’m pretty sure it’s the operational antenna.

Here the charge controller is wired in and operational.  Taken 2 July 16 at 0800

Yesterday in the US Postal mail a letter came addressed to me from Dick Stapleton who used to own Duna.  Duna is now Adventure (and we did have a naming ceremony and all that, in case anyone wonders).  In the letter was a very short note on a yellow sticky from Mr. Stapleton.  The most important part was the single sheet inside the envelop.  It was something that engineers love.

An electrical schematic for the sailboat’s systems!  I had been mulling over how to trace everything and this schematic is pretty accurate from the parts I already chased down.  The only thing different on the schematic I can find is the fact that there were only two 6V batteries when we purchased the boat, and there are four of them now, in two 12v banks tied in parallel.

Funny part is, the schematic shows four batteries.  So, now it is about as accurate as I could have drawn it.  Obviously there aren’t all the connections shown on the page, but it does tell me a lot of things I was unsure about, like the battery/service/engine switch and how it actually was wired.  I checked it last night and the meters and sure enough, it’s wired as it says.

Tying in the solar panels will be simple, or rather, relatively simple.  I need to feed wires down below from the panels, I need to attach connectors (some of the parts I bought) to tie the panels to the controller.  Then I need to feed wires from the controller over to the batteries and tie those in.  Pretty much all I need to do.  I could add a small inverter to the load link, in case we wanted to have a separate AC load in the bedroom area, but I’ll consider that later.  I do have a 400 watt inverter we carry in the car when traveling and might put it in the bedroom as back up to the large one.

We have a several hundred watts inverter in the boat.  It’s part of the Xantrex Heart monitor system.  I’ve not really taken a close look at it, and don’t remember the model, but it is capable of running a fridge, coffee pot and a few others things, but not necessarily all at once.

Thanks to Dick Stapleton for sending that schematic.  That was very helpful!

Sails:  All of our sails are roller furling sails and the main and mizzen live inside the masts, on a furler built inside.  A few weeks go when I looked over the sails I realized the UV covers were in tatters and weren’t really doing much any more but flapping in a breeze, so Kurt Seastead, the owner of the Transworld 41 Facebook Group  suggested I contact Ullman Sails and drop off the sails for repairs.  Instead I opted for them to come visit the boat, help me take them down and look things over.  I ended up sending the working jib, main and mizzen sails to have new covers installed, repairs done and so forth.  Wasn’t cheap.

Yesterday I drove to Deltaville VA to collect the sails.  Unfortunately, they lost the one bag I have for my sails, but were nice enough to give me a new one as replacement.  Thanks Jerry!

They did good work.  I wasn’t happy that they called me later to tell me they “forgot to charge me for the washing” – because the initial conversation said “wash, repair, etc” and then I got the invoice later and it added a few hundred dollars to the bill I wasn’t expecting.  Other than that over sight, things were fine.

Until I went to install the mizzen sail.

Apparently the halyard was weakened near the bottom.  As I hoisted the sail something bound up and before I could reverse everything, the halyard snapped just inside the mast opening.  I had my hands full of broken line, winch handle and suddenly sail…. the sail pulled the halyard up and out of the mast assemble, leaving me with no halyard inside the mast now.

So, until I either get up the nerve to climb us and thread the needle, or bite the bullet and hire someone, I’ll use the outside track and spare halyard to use the mizzen sail.  Might be easier anyway.  The thing always seems to bind or act funny.  Putting a sail on in a NORMAL manner might be a change of pace and give me a chance to actually USE the mizzen now.

HF Radio: JoAnne and I are both Ham Radio Operators.  She is KB0IRW and I hold call sign N0NJY.  She doesn’t really do much with ham radio these days but used to get on the VHF and chat, or do Skywarn stuff in Colorado.  Since we started refurbishing the house a couple of years ago all my ham gear had been packed up and disconnected.  I don’t even have a rig in the car any more.  The only times we’ve used it was around marinas to talk to each other or in the car traveling on the handhelds.

So a couple weeks ago while waiting on parts to arrive, I ran some wiring back to the backstay antenna and connected up the HF rig.  I have been able to do a bunch of contacts on a digital mode called BPSK31 on 14070Khz with numerous hams around the US, Caribbean and even Europe.  The rig is only Amateur Radio and I don’t marine HF (SSB as the mariners call it) right now.  Going to change that soon.

The reason for having HF in the first place to call for help if we get into trouble, or pass email traffic through Airmail and a pactor modem.  We don’t have a pactor modem though, so I use a Tigertronics SignaLink external sound card (box) connected to the computer to feed data in and out of the laptop.  Using linux as my OS.  One day, I’ll write about that.  Should be educational if not boring as hell. Ha!

That’s what’s been going on lately.  Well, off to dig in the bulkheads, cabinets and wiring to see what’s actually connected, and what isn’t, start pulling in wires, and get these solar panels doing what they were designed to do… give me MORE POWER!