Cape Fear

In 1962 a movie was made about Cape Fear.  Saw it as a kid.  Gregory Peck, Robert Mitchum, Polly Bergen, Telly Savalas were in the movie.  It was a thriller type movie.  Criminal, murder, stuff like that.

Yesterday we could have starred in our own thriller movie.  Or horror movie.  Or just a documentary about puking.

We left the docks at 0900 on the way out the Cape Fear inlet.  We were supposed to leave at 0700 and JoAnne listened to the NOAA weather, and said “Not going out in 9 foot seas” and she was right.  Completely, totally right to trust her instincts on departure.  After discussing it with Judy and Stephen for a few minutes, we all agree a couple more hours sleep might be prudent.

We pulled out on time, at 0900, and headed back to the inlet.  Tide was just starting to come back in and we slogged a bit through it in places.  Bentana had little trouble with a newly repowered boat, brand new engine.  We, on the other hand couldn’t make more than about 4 knots maximum most of the time and that was pushing the engine.  I almost turned back and said “Nope”.  But I didn’t.

We got out to the channel and dodged a ship.  He called me and asked if I’d be polite enough to step out side the markers for him, to which I replied that he could have the entire ocean should he desire it.  We moved outside the channel in 40′ of water and his bow bulb was as big as my whole boat.  After he passed, I called him and “thanked him for the slow pass” and I think I made his day, he laughed and said “Good travels”.

No more incidents for a bit.  Then the shoals came into view.  And the water turned into a rocking wash tub.  I almost turned back…. but I didn’t.

We called Bentana who was now gaining ground and moving at a quick pace out to sea.  Judy said that they were going past marker 6 I think it was and then turning to 180 degrees to catch the wind, get out to sea and then would tack back later.  I followed her lead.

We didn’t make it to the mark she turned out at.  We were taking a pounding by then and the wind was wrong, and so were the waves.  Making a decision to stop taking a pounding, I checked depths, and objects in front of me and turned to 180, raised sail and steadied the boat considerably.  I consulted with JoAnne about turning around.  She said “I want to go to Charleston.  We’re already out here.”  She had a point. I could have turned around… but I didn’t.

We sailing relatively well at that point going up and down the waves, and not getting slammed now, things somewhat smoothed out.  But JoAnne kept getting sick.  At some point I had to go below to check on something.  What it was, I don’t even remember now.  That’s when I started getting sick.  First time ever being “seasick”.  When we took a steep wave and most of the ocean washed over the foredeck and back to the cockpit coaming, it was at that point I thought “We should turn back…”.  But I didn’t.

I called Bentana to check in at 1230 as we’d planned.  They were “doing ok” and we all exchanged encouraging words.

By 1300, JoAnne was doing all she could to keep from throwing up, and I wasn’t.  It was my turn.  I got so sick I threw up for five solid minutes.  I think I nearly passed out from it.  I had heart surgery last year in May.  I still have pain in my ribs and back from where they cracked open my chest.  All my ribs crack like knuckles.  I think they all popped yesterday.  It was right about that moment in time I realized just how stupid this was.  I stopped and considered the situation carefully.  We could go on and we didn’t know the sea state would settle for sure, or we could go back, reverse course back through the washing machine, tides, current and winds all from different directions, we could heave too (we were about 8 miles out perhaps by then) and hope things settled.

At that moment, I made the “prudent” decision to turn around.  Finally.  All DAY I had not listened to my inner voice telling me “Today is not the day!”  Please note I called it a “Purdent Decision”.  It truly wasn’t a prudent decision.  It was a mistake to go out when I had thought it wasn’t a good day.  And to be clear I DO know weather conditions pretty well, and I wasn’t sure I was comfortable, but we were tired of being here, ready to go, ready to roll, get going, go somewhere else.  All the way around “prudence” was jumping up and down trying to be noticed and I was ignoring “her”.

I called Bentana and told JoAnne, Judy and Stephen at the same time we were headed back in.  I can’t bear to see JoAnne sick like that, and if something had happened to me she’d have been helpless at that point to do anything about it other than call for evacuation.  That wasn’t going to happen.

We rode the waves back in, partially under sail, trying to keep the winds right and give us some speed.  We made 4-5 knots back in, until the channel, where the waves were crossing us, and hitting the side of the boat.  Not that we had a LOT of choice in which way to go.  Shoals were coming up and waves were big, ships were headed out, and winds were still only 20 knots maybe.  Not enough to bother the boat.  It was the wave action that was sucking bad.

We passed three more, outgoing ships, I gave them wide berth and even used their wash to get into smoother waters for a bit.  That helped.  I had long since stopped being sick.  Nothing left.  JoAnne was settling down too I think by then.  I occupied her with helping watch for markers and ships.  (Hard to miss a ship, though, you really want to miss them….)

We hit the junction of Cape Fear River out going current, the incoming tide, let a giant cargo ship pass, and a tug pulling a barge, and I made it to the ICW cut headed back in with little difficultly.

The engine was still running so that was a good thing.

After we docked with help from Norm from the Marina, who was kind enough to stay on the dock until we arrived, Jay from Knot Working and the folks from the power yacht Chrysalis, I discovered the water pump running down below.  I killed the breaker assuming the worst.  A bit later, I discovered all the water in our main tank was pumped out (probably to sea) and the pump was running for awhile I guess.  I’m surprised it didn’t burn out.

This morning I heard Judy and Stephen got beat up pretty badly as well, Judy was also, apparently ill as well.  They made it as far as Georgetown.  Far short of Charleston.  I believe they said (JoAnne reported) they are on anchor now and resting, well and safe.

I have work to do on the water tank.  I’m going to extend our visit here at least a week.  I have work to do on the ship, repairs to make and I’m going to have a little chat with a few local business establishments around here…. because I came back to a message about my credit card being compromised (AGAIN) and five transactions for 17-28 bucks occurred yesterday in Raleigh, a good distance from here… but there are three suspects who could have used my number (having all three taken my card out of my sight to take a payment, or getting the number some other way).  The rest of the places I used it, the card was never out of my sight and they swiped it into a machine so they couldn’t have easily gained the information from the card).  I’m NOT happy about that happening either and if I discover for a fact who did it, there’s going to be consequences.  I HATE thieves and I won’t hesitate to take whatever action is required to prevent them from stealing again  (legal or otherwise given the right circumstances).

Today, JoAnne gets to relax her back and rest, I’m tearing things apart, making coffee and preparing for the cold weather coming.  We are discussing giving up and quitting, selling the boat, getting an RV, going back to Colorado defeated, going on down the ICW, or choosing better sailing days on the outside.

Stay tuned.  We will let you know what’s next.

Fair Winds!

Rick

Advertisements

Christmas 2016

Hi everyone.  Thought I’d try to get in one more blog post before the end of the year.

It’s been a long, challenging year for us. In fact, two challenging years.  (I already posted a message for Christmas on Facebook, and will probably restate a few things here so if you think you’ve read it before, you might have).

In 2009 we decided to learn to sail, and eventually to become cruisers.  JoAnne and I have read literally a couple of hundred books over the course of time since that day we made the decision.  While all of them were helpful, some were stories, fiction, true adventure, and books about storms.  All of them helped prepare us for everything we have encountered and a few things we’ve yet to (and don’t want to) encounter.

Last Christmas we were sitting in Colorado with our kids and Grandkids after JoAnne’s back injury.  We thought more than once we wouldn’t get back to the boat and would have to sell her.  But, things didn’t turn out like that.

We’ve traveled back and forth across the country about five times since July 2015, for medical appointments, visiting and due to injuries.

This season we moved the boat to Cole’s Point Marina, where we worked on the boat.  We added solar panels, repaired the refrigeration, I had already added a new stove, refurbished the sails, repaired many little things, added a composting toilet, removed a broken electric toilet and replaced it with a Jabsco pump toilet.  I’ve added strip LED lighting to the main cabin area (and will add some to the forward cabin in time, along with some new wiring I’ll pull in when I have an opportunity).  We’ve eliminated a few things (not enough).  We’ve picked up an inline water filter to remove the bad tastes and to take water aboard.  I’ve made a water catchment device to collect rainwater, picked up a propane heater for the cabin, as well as an electric heater.  We’ve worked out how to make the wood stove work properly.  I’ve rewired the nav station, radio gear (neatened it all up and added a special power strip for DC radio gear.  Eventually all the radio gear will be tied there).  Oh, and I varnished about 80% of the woodwork aboard Adventure.  I have been testing some varnish.

I certainly am missing a few jobs we did.  I’m sure I’ve forgotten something.

A few weeks ago we ran into some more alternator problems (which I documented) and had that repaired and discovered a LOT of other issues on the engine which we also had taken care of.  During the work, I had the mechanic teach me a few things since I was paying and arm and a leg (I know why pirates have hooks and peg legs now…).

We paid up our bill here through 6th January and decided to stick out Christmas here.  One of the folks sailing down from Canada we’re friends with (Rosemary and Joe, aboard “Winds of Change” were coming down and so JoAnne invited them to dinner.  Turned out other boats were traveling with them.  We thought two, then it was actually four boats total.

So the dinner turned into a pot luck.  Then more cruisers and liveaboards near by joined into the dinner.  All told, on Christmas Eve we had about 15-18 people (I never counted them up), and one boat’s couple left to visit relatives so they missed the dinner.  Others joined in and everyone brought food, drink and stories.

Over all, a grand success.  JoAnne was worried about putting something like that together.  I’m not sure why.  She has always fed an army (usually doing ALL the cooking herself, raising five children, usually having boarders in the house, and random neighbor children who ALWAYS were there for dinner almost every night).  So, whatever trepidation she had vanished as she turned on her “Chef Skills” and made a giant pot of stew which likely would have fed everyone in the marina that day with a side of rice.  Fortunately, there was plenty more food than we could ALL eat.  Everyone brought something, from sloppy joes to stew, to small “sub sandwiches” to enchiladas and bottles of wine and rum.  I was shocked at the amount and quantities.  I tried a little bit of everything and had two full bowls of stew.

“Winds of Change” happens to have been the name of our first boat, our Macgregor Venture.  So when we saw the name on the group, we had friended them on Facebook immediately.  After all, we share a connection.  The boat name, and now the Leaky Teaky boats, ours the Transworld 41 and them the Formosa 41.   It was wonderful to get to meet them in person finally!

I have to say that I still like our center cockpit a bit better, though I think sailing from the aft of a sailboat this big might have a few advantages over the CC.  I can’t tell you though, what those might be.

All in all, this year traveling from the Potomac in late October to here has been relatively uneventful compared to last year.  Although, we have gone aground a few times, we’ve bumped some pilings, and I have some small damage on the port side where I caught a pole in the water, the engine conking out…. we haven’t really had major issues.

Yes, it was stressful coming down the ICW.  I was at ease going outside and motorsailing at night, but I always worry about all the things that can “go wrong” out there.  I worry for JoAnne’s safety much more than mine (because, quite honestly, I’d done some really dangerous things in my life and while the majority of them I wouldn’t want to repeat, I understood what I was doing, and knew I could die).  Sailing in the ocean is one of those things.

You understand it.  You know you can die.  But you also, always, concentrate on the moment in time, staying alive, staying safe, staying on course, going there you’re going and knowing you have options to handle almost anything.  Even, right down to closing down the hatches and doors after taking down sails and putting out a sea anchor, then hoping the boat will ride out whatever you hit.  In almost all cases, a boat will do fine.  It’s generally the crew who can’t handle it.

We have one issue on our boat.  JoAnne isn’t really able to run the boat alone.  I’m worried she will injure her back again and she has been prone to falling in the past so I won’t put her in danger.  That means I tend to do everything on deck, though I have been letting her toss lines out, and put out fenders to get used to doing it again.  So running a “shift” isn’t too easy, unless I set things up and let her stand watch, let the autopilot take care of things until the wind changes or we have to tack.  Then she can wake me if I’m sleeping and I can do the work.

This basically means for us, sailing straight to Florida isn’t going to be easy.  From here at five knots it would take us about 65 hours (give or take where we pull in).  And just two of us doing it.  Then we have to count on the engine from time to time to charge batteries if the sun isn’t out (solar, remember?)

Therefore we’ve come up with muliple plans to get south now.  From here we are planning to sail straight down to Jacksonville area.  And as we go we’ll make changes to our thinking based on the conditions we encounter and how tired we get.  We’re going to try it in pieces as well.  So, we’ve picked a half dozen distant spots to pull into if need be to anchor and rest.  We’ve also planned part of the route inside as well.

We have many options from here, but the main goal, to “get south and to warm” is the priority.  That and using the engine the least amount necessary, anchoring when we need to, and staying warm.

So as the year closes on us, we are shooting to be in Florida not later than about 3 weeks from now, whether we can move more quickly, or slowly will depend on a lot of factors including the weather and my ability to take us long distances on the boat.

To this day, I am not ready to lie down and sleep with the boat moving.  So, I’m probably going to have to learn that skill next 🙂

I want to wish everyone a “belated Merry Christmas” as I’m posting this the day after.

And I want to give everyone something to consider for the New Year.

Many people make “resolutions” to accomplish or do something important in the New Year.

I made a resolution never to make resolutions a long time ago, so I don’t do that.  But I do make plans, I do set goals, even if they are in my head and not written down.

For the cruisers, the dreamers and the wanna-be cruisers who’ve not quite gotten here yet, I’m going to give you a secret.

The secret to success is “perseverance”.

That is the secret ingredient to “success”.

If you have a dream to move aboard a boat and go cruising, you will have to work at it.  You will have to plan.  You will have to make decisions, some easy, some difficult.  You will have to write your notes down.  You have to learn to sail if you don’t know how.  You have to work your ass off.  You have to practice.  You have to learn new skills.  You have to travel a bit, you have to stay home a lot, you have to spend some money, and you have to save money.

With out laying out a map for you, I’ll tell you this:

  1. Make a plan (Do you want to cruise full time, or part time? Do you want to just travel the Chesapeake?)
  2. Get your skill set together as you go, every day work on it (Can you sail? Learn! Wood work? Plumbing?)
  3. Study hard, study sailing
  4. Save your money.  Spend it wisely on learning, important books you need (Use the LIBRARY, it’s FREE!)
  5. Pay your bills.  ALL Of them.  Eliminate them.  If you use a credit card, PAY it off EVERY MONTH.
  6. Have your goals written down and check them off as you go.  Once you get one, check it off. (Then go back and pat yourself on the back!)
  7. PERSEVERE!  Do NOT give up.  Do it.

Adversity has a way of weighing people down, depressing them, making them believe they can never get up again and sometimes adversity will literally break your back, bones, make you sick and leave you in pain.

Pain is the one thing that tells us we’re still alive and we should be doing something else.  Find a different route.

If you want to sail, do it.  Start small if you have too (I didn’t, I am glad I didn’t.  I started on a 30′ boat and went SMALLER to a 25′ boat for practice, and the 25;’ boat was like a part of my arm when I stepped aboard).  Getting on to a bigger boat like this ketch at first will be daunting and probably stop one from sailing without a very good instructor.

I’ve been teaching myself how to sail this boat.  She handles differently that a fin keel, from a sloop and from a dinghy.  She handles much differently that my little Venture did.  She has a mind of her own and I’ve had to learn to tame her, and make he go where I want her to go.  It’s difficult to do with no books on the subject and only the meager knowledge I gained from an instructor and sailing my own sloop.

The point, though, is don’t give up.  Continue.  Persevere.

That, folks, is the secret to success.  You just take that and apply it to your set of circumstances.  YOU are the one to make it happen.

All our best for a Happy New Year – and I mean the whole of 2017.

We’ll see you in the Warm.

Rick and JoAnne

(PS I will add images into this a bit later, so check back when you have time)

 

 

Perkins 4-108 Issues, LED Lighting

A few days ago we discovered a broken bracket holding the alternator.  It was not something I was going to ignore, and certainly wasn’t going offshore with it broken like I found it.

The forward part of the L-bracket was shattered.  One side (aft) was still holding solidly, and the bolt was going through the two pieces.  However, a broken alternator bracket would cause vibration (which it did when it broke) and eventually would have torn the belt to shreds.

Therefore I called for a mechanic because I haven’t any way to do welds, and it’s one of the skills I don’t have (but I certainly am going to look into learning it now).  I am sure that I could have accomplished all the work the mechanic is doing, and if there’s ever a “next time” I’ll do it.  I’m am not the worlds best mechanic, and honestly, I don’t like getting dirty inside engines.  And since we’re on a dock, and I’m already paying for it… might as well have a professional look things over anyway.  I’m glad I did because I’d never have seen the exhaust leak before it killed us.

Technician came out rapidly (he was on-site), removed the bracket, did some testing and we discovered with our faces in the engine that the manifold was blowing a lot of exhaust out into the engine compartment.  Well, that opens into the bilge and cabin.  Long story short, that needed repairs so we didn’t… umm…. DIE.

He did attempt a repair, put new gaskets in and had the welds accomplished.  There was an extra bracket installed which was causing some of the problems with being misaligned!

But other issues ensued as well.  We noted some oil leaks (but had a hard time finding them exactly, finally he found them and one, the least one, is on the timing cover.  The major one is the valve cover area, and the gasket (after looking at it) is pretty old and ate up.  It’s either original, or it’s pretty old.

On Friday last he said “It will probably be Monday before I can come back”.  We said “OK” and then went and rented a car from Enterprise on their weekend special (10 bucks a day for Friday through Monday morning, giving us almost four full days for 38 bucks).  And Jason called and came back on Saturday to repair things because… he got the parts in sooner. Haha.

Ok, now we’d paid through Wednesday and had to extend a few days.  Today is Tuesday.  We used the car, turned it in yesterday.  Made a trip to Wilmington to find a Radio Shack and some parts I needed for electrical project I was doing.  (I found one, and 45 BUCKS later, I had my little project boxes, toggle switches and a fan for our bathroom and the composting toilet, which I’ll do at a later time when I have all those parts…).

So, it’s raining like hell yesterday after dropping the car, so we duck inside the Dead End Saloon up at the top of the hill to wait out the rain and we run into Jason who is running back and forth from the boat to the truck for tools.

Not good news.

  1. The valve cover DOES need a new gasket, badly.
  2. The timing system isn’t as bad.
  3. The mixing elbow from the exhaust is pretty bad, but we don’t know yet how bad.
  4. The injectors are spitting fuel through (which is what causes the white smoke on startup).
  5. The manifold attachments are missing a couple of nuts, but worse, even after new gaskets and sealing, it’s not good.  The thing has overheated and is slightly warped.

Bottom line, has to be retooled to make it flush again.  The valve cover needs removal and gasket replaced.  The timing area (a bunch of gears connected to the crankshaft) leaks oil and SHOULD be replaced but that’s a pretty big job.  The mixing elbow, once removed is trashed inside. Pieces of it are missing.  Causing back pressure.

So, we need a new one.  I told Jason to go ahead with the work.  We’re going to wind up doing a “monthly rate” here at the marina now I guess.  Only way to save a bit of money now. This is likely going to run about 3000 dollars for the amount of work.  /sigh

Anyway, we should have rebuilt injectors, new gasket on the valve cover, and a new mixing elbow, a replaced bracket on the alternator (and it is now PROPERLY aligned, which it wasn’t, which has been causing most of our issues with belts and vibration in the past).  Right now the engine valve-rocker cover is off and everything is covered with cloths.  Elbow is off.  Injectors are gone.  Fuel is all shut off.  We’re stuck on the dock for a few more days.

I spent today working on our lighting.  I don’t like the incandescent lamps (good for reading, bad for the batteries) and the LED lamps I’ve used don’t give us quite enough light for the interior when it is pretty dark outside.

A few months back I bought three rolls of LED strip lights that work on 12VDC (I had bought a tube of them at the hardware store before that, and discovered they were set up for 120VAC and it wasn’t an adaptor, but rather they use resisters and diodes to drop the voltages down to what LEDs can use, a couple of volts each).  Anyway, I can use the tube lights on the dock, when we have AC power only.  I couldn’t modify them safely to work with DC.  Instead I bought the strip lights and put them in my little project box.

I needed toggle switches and a way to mount them. I considered three or four methods including little project boxes, but Radio Shack is the only place to pick those up (unless I order them online from someone like Jameco, Digikey or someone similar).  I haven’t been anywhere that I could really order things, long enough lately to do it, so… RS it was.

So, I collected parts as I could.  A while back I saw someone else’s work with LED lights and liked their stuff.  It was Acadia, Jon and Marcia’s boat.  He had used little boxes like I wanted to do, and had mounted them using sticky tape (all of the parts are very light).

Today I put everything together and installed strips of LED tape on both sides, under the area where the grab rails run along the length of the ship.  So the settee area is now well lit when you turn on both sides.  I doubled up the starboard side for JoAnne because she sits on the “couch” a lot and reads there.  She has extra light for book reading now.  She loved it.

Starboard Side Lit up

Port side lit up

Another shot of the port side, the mess is the tools, looks like we need to dust again. lol

The next few images show the parts, and some of the tools I used to do the job.  The boxes are simply mounted with “doubled-sided-sticky tape” (the 3M stuff) and I tied the wiring to the existing lamps because honestly, I don’t feel like ripping out the wood that is between the overhead/deck above and the lamps.  There’s a hand full of wiring running inside there and if I take it all out, I’ll be rewiring the entire boat in no time – and I don’t have the time to start that project right now. haha Eventually, but not now.  I want to be able to sit there and read, look at charts at the table and even do soldering (like I did today with my makeshift light you see in the background, which doubles as an emergency anchor light).

The wire has sufficient current carrying capability for very short runs.  I wouldn’t use it for something other than LED lights.  It’s really meant for speaker wires, but it’s 16 gauge and can handle about 3 amps of current.  These lights pull about 500 milliamps (1/2 amp) on either side.  So a total of perhaps a bit under 2 Amps.

Close up of the LED tape strip, and the internal part of the switch box.  The wires are soldered internally and there’s a feed that is attached at the existing lamps using crimp connectors.

Used tywraps as strain relief inside to prevent accidentally pulling the wires from the box.  Since it’s inside of a box I used a bit of electrical tape to insulate the soldered connection.  It is inside a box which no one will see (except here in a picture) so I wasn’t looking for elegant or neat, just “good” and besides, I don’t have any shrink tubing or I’d have used that instead (old electrical wiring habits die hard sometimes).

The finished box.  Double sided sticky tape goes on that side, the whole thing gets “stuck” to the overhead (under the grab rails on the bulkhead) and hopefully will hold for a few years.  I cleaned the surface with acetone before sticking things in place. It’s painted with a flat white paint, so cleaned right up and the LED tape is also “3M” tape so it ought to hold a long time.

LED light strip in “action” – and yes, I noted the damage to the wood in the picture.  Apparently there was a leak there once.  It’s been patched somewhat and I probably should pull that all down and put up new wood or repatch it at least (which means I’ll be pulling new wires in as well to the electrical, therefore, that isn’t happening right now either. haha)

Starboard side, double strips front and back.  Port side only has one strip.

Sometime in the next few days if I get a chance, I’ll do the same thing with the galley area, because it’s in the walk-through to the aft cabin and very dark.  There are four lamps, two under the grab rail area, one behind above the engine, and one on the over head.  None of them provide enough light for the galley, or working in the galley, so that’s going to change soon.

Still here….

Well, we’d hoped beyond hope to either have a new part today, or have the old one fixed/welded/repaired.

Nothing of the sort happened.

They have to find a welder. Because the part isn’t available “anywhere”.  I might have been able to find one myself, but don’t have all the resources to hunt for it, and honestly, I’m just not an engine guy.  And getting it right the first time wouldn’t have happened either.

Jason called and said the welder could get the part done tomorrow probably, but the gaskets we need to seal up the manifold will not be here until Monday.  So, we’re going to be here until Wednesday now it seems.  JoAnne suggested we could rent a car and explore, so I arranged for that as well.

I’ve got some chores to do on the boat, deal with batteries, the composting toilet and maybe get some other little things done I’ve put off.  The varnish is already suffering after less than six months.  Actually, three months. Not sure I honestly want to deal with varnish, but it looks so nice.

I’ve been looking over our trip and we’re probably going to do three outside jumps.  Short ones, to take us to Charleston.  None of them will be over about 35 nm in any given day, and working out some anchorages to stop in for the night.  After Charleston, it looks like we will make one large overnight to Florida to skip over most of South Carolina and all of Georgia.  Might be a full 24 hours.  I haven’t calculated that far ahead though.  My brain is already fried from dealing with the engine.

Won’t be going anywhere until at least Tuesday for sure… and then we have to see what the weather is bringing then anyway.  I can get a 10 day out forecast, but they are rarely what is predicted 10 days away.  So, I’ll deal with it a bit closer.

Engine- Still

So Mike came by this morning with some transmission fluid, and a couple of things left to do. He assisted in adjusting the tachometer to the right settings, but it was “by ear” so it’s not precisely accurate but I’m guessing it is closer than it was before.

The trans was low, like almost a quart… ack.

Then he had something niggling at him, it was that the over flow was still bugging him so he pulled the water pump cover and found a problem, again, one I’d missed. There is a severe wearing in the area where the water is pumped through. In fact, on closer checking, it’s broken.

After a few hours he called me back with several options. I chose the more expensive option. Pump replacement. $800 bucks for the part. He said it would be cheaper if we run down the coast and look again. And he could have just put in a new impeller.

I told him , No, this is my life and my wife’s life, and the safety of the boat. Get me a pump and spare impeller. He actually said “You can get all the way to Florida without bothering” but I think that’s a half-assed job.

Get me the parts I need, make the new parts work, get me spares. I’m good.

They won’t ship though until in the morning. If the part gets here tomorrow, I’ll be surprised. He is talking to the marina to get us a break on the stay because frankly, they are bloody hell expensive.

The saga continues…..